Site Survey for Espresso Machine Installation
April 18, 2019 | Time: | Location: | Category: News/Resources
Site Survey for Espresso Machine Installation
Carefully check the dimensions, not forgetting the extra height needed to access/fill up the coffee grinder (usually sitting on a knock drawer). Plus space for the CTU water filter, located between the machine and water supply.
Eclipse
- Overall depth: 585mm
- Back of machine to front of front foot: 485mm
- Back of back foot to front of front foot: 400mm
Elegance
- Overall depth: 600mm
- Back of machine to front of front foot: 460mm
- Back of back foot to front of front foot: 410mm
Synchro
- Overall depth: 593mm
- Back of machine to front of front foot: 550mm
- Back of back foot to front of front foot: 490mm
Synchro T2
- Overall depth: 610mm
- Back of machine to front of front foot: 560mm
- Back of back foot to front of front foot: 480mm
Grinder
- Height of up to: 615mm
- Plus access height: 300mm
Under Grinder Knockout Drawer
- Height of up to: 90mm
CTU Water Filter
- CTU5 H:380mm x W:170mm
- CTU10 H:490mm x W:222mm
- Work surface suitable for up to 100kg.
- Power supply within 1 metre of machine, check watts/amps required and 1 socket for each appliance.
- Water supply within 1 metre of machine with washing machine fittings (machine fittings 3/8” and CTU water filter fittings 3/4”).
- Waste below machine. If not available a bucket for waste to run into (ideally with a completely vertical drop to allow water to run away freely). If possible, a hole in the worksurface should be made and located centrally under the espresso machine with a diameter of 50mm.
Further information available on request.
